1435 Ultimate Stone Sealant
- Ultimate Stone Sealant is a special blend of polysiloxanes which crosslink below the surface of the
concrete making the concrete surface water repellant and stain resistant allowing spills to be removed
more easily. This product can either be applied alone or on top of other products to provide double
protection of the concrete with both deep sealing and a repellant finish.
- Ultimate Stone Sealant can be applied on all types of decorative and stained pavers, aggregate
driveways and walkways, bricks, clay tiles, sandstone, limestone, marble, granite, slate and any
natural stones. It can be used on above grade plaster and stucco providing a breathable barrier against
water, stains and acids and will seal hair line cracks. The product can also be used to seal swimming
pools and fish ponds to prevent water escaping through the concretes' capilliaries and pores. It can
also be used in dog kennels and agricultural institutions to provide stain resistance which assists
in the maintenace of these enclosures.
- Ultimate Stone Sealant is easy to apply using a brush, medium nap roller or low pressure sprayer.
The surface to be treated does not need any special treatment but it must be clean to allow proper
penetration of the product. It will cover approximately 200 to 400 square feet per gallon depending
on the concrete porosity and two coats are recommended. Typically a 5 gallon pail can seal upto 1,000
square feet of poured concrete using two applications.
- The product leaves a natural finish (no sheen) after application and the surface will not be slippery.
- Ultimate Stone Sealant has also been proven as an effective anti-graffitti barrier helping to prevent
paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
- Ultimate Stone Sealant is a ready to use product and does not require the addition of an activator
which means that it has a shelf life of at least 6 months.
Click to main page