
272 Kent Kalkwasser Mix, 100gm
273 Kent Kalkwasser Mix, 225gm
Kent Marine
Kalkwasser Mix
Directions: For best results adjust system KH to 8 to 10 dKH with Superbuffer-dKH or Marine Aquarium pH Buffer
first. Add 1/8 minimum to 2 teaspoons maximum powder per gallon of fresh water for a stock solution.
Let stand for several hours. Only mix enough to last a week. A white precipitate may form on the bottom of the
container. Above this is the clear calcareous water, which should be added to the tank SLOWLY. Use drip method
or dosing pump to drip into system on a continual basis to replace all water lost to evaporation. Does not cause
pH to rise significantly when added slowly, but measure pH regularly. Use Kent Marine Superbuffer-dKH to control
pH and carbonate hardness. For best results use Kent Marine Strontium & Molybdenum Supplement also.
Considerations for use: If you add a teaspoon or more of Kalkwasser Mix per gallon of water for your stock
solution, a crust will probably form on the top of the water in your container. This is normal and it will
act to impede the diffusion of carbon dioxide into the kalkwasser solution. This will assist in keeping the
kalkwasser solution fresh. Dosing: Do not ever mix Kalkwasser Mix with any buffer! Kalkwasser Mix should be
dosed alone! If you mix it with trace minerals, many of them may precipitate out!
100g Treats up to 6000gal